Latest Blogs and News – Captain Steel

Oct 18, 2026

Earthquake Resistant TMT Bar: Elongation, UTS/YS Ratio, and How Captain 600 EQR Compares With Fe 500, Fe 500D and Fe 600

There is a tempting shortcut in reinforcement buying: assume the strongest bar is the safest in an earthquake. It is the wrong instinct. A strong bar that cannot stretch much before it breaks is a poor choice where the ground...

Oct 16, 2026

How to Cut, Bend and Weld Epoxy Coated TMT Bars on Site, and Why Touch-Up Comes Last

A bar bender picks up a coated bar for the first time and asks the obvious question: if I cut this, bend it, maybe weld it, what happens to the coating that is supposed to stop rust? It is a...

Sep 24, 2026

Best TMT Bar in India: How to Judge Quality Without Being Misled by Price or Marketing

Ask three dealers for a rate on the same reinforcement and you will often get three different numbers, along with three confident explanations of why theirs is the one to trust. One calls his steel premium. Another points to a...

Sep 18, 2026

Choosing TMT Bars in Bihar: High Water Table, Seismic Zone IV, and What Both Mean for Your Reinforcement

Two quotations land on a homeowner's table, both for Fe 550 bars, and the cheaper one wins. That is how many reinforcement decisions in Bihar are still made. Grade and price are easy to compare on paper. The harder questions,...

What are steel TMT bar grades, sizes and quantities for house construction

Sep 11, 2026

Steel TMT Bar Basics: A First-Time Home Builder's Guide to Grades, Sizes and Quantities

The first structural drawing a homeowner receives usually causes a small moment of panic. Scattered across it are markings like Fe 500, Fe 550, 8 mm, 12 mm, 16 mm, and a column of numbers that seem to assume you...